Sales & Support
Request A Quote - Email
Payment & Shipping Terms:
|Product:||Concrete Placing Boom||Column Length:||5m,8m,10m|
|Function:||Construction Buildings||Feature:||High Wear Resistance Boom Tube|
concrete placement boom,
boom pressure concrete machine
Industrial Concrete Placement Boom / Placing Boom Cylinder Jack Lifting
|Model of placing boom||HGY33S-4R||HGY33P-4R||HGY33SC-4R||HGY33PC-4R|
|Performance||Max. radius (m)||33|
|Free standing height,Slewing range||22.7m,400°|
|Supply power to equipment||380V/50Hz|
|Electric motor||Motor model||Y2-200L-4|
|Hydraulic system||System pressure(MPa)||32|
|Oil tank capacity(L)||280|
|Control mode||(Cable+Radio) remote control|
|Clearing mode for concrete pipe||Water clear / Dry clear|
|Section of tubular column (m×m)||0.75×0.75|
|Arm(Booms)||Boom model||fully hydraulic foldable arms|
|Delivery pipeline diameter||DN125mm|
|Length of end hose (〃×m)||5〃×3|
|The first section||Length(m)||9.3|
|The second section||Length(m)||7.9|
|The third section||Length(m)||7.9|
|The forth section||Length(m)||7.9|
|Climbing||Climbing mode||Cylinder Jack Lifting|
|Internal climbing step distance(m)||0.52|
|Floor frame||Hole prepared in floor|
|Shaft frame||Size of climbing shaft : 2.0m-2.7m|
|Min. space between internal climbing frame||Climbing(m)||3|
Optimal design of boom-&column-structure ,Inner hydraulic oil tank renders a compact placement.
The key components of hydraulic- and electrical-system are from world famous brand,which ensure safety and stability.
1. Standard types without counter weight
2. Floor or shaft climbing
3. Step speed or stepless speed(proportional control)
4. Column length:5m,8m,10m
5. Delivery pipes for option as project budget:
⑴ Ordinary single straight pipe and cast steel bend,service life not more than 20,000m3 ；
⑵ High wear resistance double straight pipe and bend,service life not less than 50,000m3；
Maintenance of concrete placing boom
Remote control and electric control system: waterproof, anti-magnetic, anti - impact.
Lubrication point: add lubricating oil regularly.
Hydraulic oil and hydraulic system: anti-pollution, anti-emulsification, often pay attention to the tank level gauge.Once the hydraulic oil is contaminated or emulsified, the placing boom must be stopped immediately and all the hydraulic oil replaced. If the liquid level gauge shows insufficient oil, be sure to fill up.
Conveying pipe: conveying pipe inner wall with concrete direct contact and relative movement, will cause wall wear.When the wall thickness gradually reduced to a certain extent, will not withstand the pressure of the concrete inside the pipe leading to burst, and even cause safety accidents!Therefore, when the placing boom has been used for a long time and the concrete content of the conveying pipe reaches 50% of the conveying pipe life, it is necessary to check the thickness of the pipe wall as a daily work.
Daily cleaning of spatter concrete: due to the frequent spatter of concrete falling from the upper floors, damage to the internal climbing devices (especially the jacking cylinder) must be cleaned frequently, so that the concrete cannot accumulate and condense. Therefore, it is suggested that under the premise of not affecting the normal work, try to cover the internal climbing device to prevent it from being polluted by concrete.
About the model
HGY ×× S or P C or blank - × R
① ② ③ ④ ⑤
① Hydraulic concrete distributor
② Round number of Max.radius(m)
③ Step speed regulation(S)or
Proportional control speed regulation(P)
④ With(C)or without(blank) counter weight
⑤ Arm section number ×Roll folding(R)
【Identification letter description】
S: Step-speed adjustment
P: Proportional (Stepless speed regulation)
C: Counter weight
1. Model HGY33S-3R means:
Without counter weight,max.radius 33m,step speed regulation and 3 roll-folding arms.
2. Model HGY33PC-4R means:
With counter weight,max.radius 33m, proportional control speed regulation and 4 roll-folding arms.
Contact Person: Liu